SAMSUNG J3+ CLONE FIRMWARE FLASH FILE HANG LOGO DEAD RECOVERY

SAMSUNG J3+ CLONE FIRMWARE HANG LOGO DEAD BOOT REPAIR

J3+ CLONE FIRMWARE HANG LOGO DONE

J3+ CLONE FIRMWARE DEAD PHONE FIX

SAMSUNG J3+ CLONE FLASH FILE HANG LOGO DEAD RECOVERY DONE

আপনি ফাইল ডাউনলোড করার আগে দেখে নিন সেটের মডেল এবং আমার দেয়া সেটের ছবি ঠিক আছে কি না !যদি সবকিছু মিলে যায় তাহলে ১০০% কাজ হবে

MT6580__T63__J3+__T63__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

 preloader_yuanda6580_weg_l.bin

SAMSUNG J3+ CLONE FIRMWARE FLASH FILE HANG LOGO DEAD RECOVERY

Read How to Flash scatter Rom:

Step 1: Download and extract with winrar the stock Rom on your computer.

Step 2: After extracting you will find the Firmware file

Step 3: Install the USB Drivers.skip if drivers are already installed on your computer.

Step 4: Open the SP Flash Tools and load the Scatter File from the firmware folder.

Step 6: Click Download Button in the SP Flash Tool to Begin the Flashing.

Step 5: Connect your Smartphone to the computer using the USB Cable.

Step 7: Green Sign will appear the screen, device successful Flash Done.

Important Notes:Take A Backup Of Your Personal Data,Before Flashing